Post Production

Stuart was incharge of edting of the film. However a Director I was present overseeing the editing, contributing ideas aswell as making sure the editing worked cohesively together and ran smoothly. Jack got all of the sound and music that we needed for the film.

We used Final Cut Express to edit our movie, alternatively we had access to iMovie but we felt iMovie did not have enough advanced functions at hand for us to use to create as high quality project that we hoped for. Final Cut also allowed us to be able to export the movie file in different ways and sizes.

We changed the canvas size to cater for the HD video we had recorded. To do this you press ctrl+c on the canvas, then make it 1080p size. One drawback of this is that it increased render time however we will have a better final result and give us less limitation when we finally export it.

We had an issue with directly inporting the clips into Final Cut. What we did to get around this was to import the footage into iMovie then exporting it to the desktop. Then we copiend the clips into my resources on Final Cut.

 First we cut all the clips that we didn't want and imported the sounds that we ould be using.

We created a saturated effect with a deep blue hue for later use. The  logo we had created  for Back Alley Productions and Isolation on Paint Shop Pro we copied onto the timeline.

We started with the two pieces of text that would be in the trailer. We used sound accents when the test came up which focuesed the viewers attention and made it so the text moved slighlty.

There was a very interesting clip we had filmed of the antagonist walking towards the car. In this clip the headlights turned on and off, as he walked closer. My idea was that we should edit the trailer  so that between the flashes of light we had other parts of the film. This helped to balance the trailer and gave an interesting effect as the story is gradually revealed. Stuart came up with an interesting light ray effect which enhanced these clips.

Jack was able to obtain a compilation track of different movie trailer songs. We listened to all of them carefully before selecting the one that we felt was most approriate for the film. It was slightly too long for what we wanted it for, so we had to cut it down a bit.

Using the internet we looked up what exporting settings would give us the best quality for our project. We exported using QuickTime Conversion, then made the format a QuickTime Movie file as opposed to an AVI or mpeg-4. Then we changed the compression type to PNG which is the best for exporting in HD, then made it export with millions of colours. Because our file wasn't a DV file, we had to make the size just "current" which we found was 720 x 404 pixels which we then de-interlaced. For the sound, we just made it the best quality possible, as a lot of the trailer was very sound orientated. I then un-checked the link to make it ready for internet streaming as this compresses the file which lowers the quality.

Filming for the Second Time

Our original tape that we filmed on experienced technical difficulties adn we could not play it properly. It skipped around and lost sound. This was extremely frustrating considering how long we took to do it. I tried taking the camera and tape to a repair shop but theey couldn't do anything about it.

Because of the compications we had to film again. Originally we had used a Sony mini tape but his time we used   a different camera that uses solid state memory, which is far more reliable than the tape. The camera we used is called a Sony HDR-XR155.

On the second time we filmed we where unable to get a second car so we had to change the plot to get around this. The antagonist attacks them on foot and from the front this time. Although filming again was tedious we where able to do more shots and techniques as well we where able to do it much quicker this time as we where far more experienced.

Creating The Poster

We had to make a poster which would accompany our film. Stuart was the one of our group who was most familiar with desing software such as photoshop so he made it while I contributed ideas and advice. We went out into Canford Heath and took a range of different pictures. We decided that we would use a picture of the sun beaming through some trees for our final poster.

Then, using Paint Shop Pro 8, me and Stuart began to edit the photo.

 

First we changed the colour, contrast and brightness to overall enhance the picture to get it to look like what we wanted.

Then Stuart used the paint tool to Darken all around the edges of the photo which made the viewer to look centrally at the image. It also created a sense that the edges where closing in which we felt fitted well with our film. Also by darkening the image it looked a lot more forboding.

From our Research we had found that the cast, producer, editor, director, distributor and production company were all featured in small writing at the bottom of the poster. Stuart did this in White and cleverly darkened the background further around the text so it was easier to read. Also Stuart added our the logos of the production companies and distribution companies.
.

Actual Filming

We finally got round to do our filming when the weather was more generous. We used my camera to film and transported all the equipment to the location using my car.

Equipment that we used:

Sony XR-155 camera
Tripod
White card to reflect light
Kodak HD pocket camera
Torches

I was the directorof the film, this meant I had to make sure everybody else knew what they where doing and when to do it aswell as organizing everything, I also had to find the location and make sure that the continuity between shots was kept. Jack was in charge of lighting, I showed him how we could use the torches and card to create softer reflections of light to better give the impression of natural light, and helped find the location to film. Stuart was mainly cameraman although I did film some shots, he was incharge of the camera and the various shots that we used.

Instead of using the Tripods that we bought for our film we held the camera wihth our hands. We felt this meant we could get better angles (e.g. we couldnt get the tripod open in the car), also we felt the shakiness helped to add to the disorientation and dramatized events.

We filmed each shot multiple times so we could look afterwards using hindsight and decide which was best for the production, and we also did each scene from different angles, so when editing the film we could cut between shots which we felt would make the film look more profeshionally done aswell as allowing the viewer to see what is taking place on screen far easier.

To get light ont he scene we either used a very high powered LED torch, the headlights from my car, natural light(Moon) or a slightly less powerful yellow tinted bulb torch. We felt that we dealt with the lack of light very well in the final piece. Shooting in the dark is always a huge problem even for films with huge budget and considering we didn't have a budget we did extremely well. At one point we did discuss using night on day but we felt it would retract from the realism of the piece as most people can spot it.

Whilst filming we kept to the original plot that we had planned for. When on set however complications meant we had to change some sections and new ideas came up which meant we shot scenes that we didn't initially plan for.

Ther postponing of filming

Unfortunately, due to the weather of snow and ice, our filming had to be postponed until better conditions. So weused this extra time to slightly edit the plot of the film and develop the characters, we also got our equipment together and ready for when we wanted to film.

The location

The location I found was just outside Swanage in an area called rempstone which is located in Dorset. This meant that the loocation was close to our houses and we could easily get their and back with all of the equipment that we needed.

The location selected was extremely important as it had to strongly show the isolation of the main charecters. This are was perfect as it was filled with tiny country roads wiht no streetlighting or other vehicles present. We did most of our filming on one quite stretch of road as we felt it was the most appropriate location. The road was extremely isolated and had trees all around to which we felt established some sense of entrapment. As there was very little light at the location and we where doing our filming at night we had to either use torches or the moon for lighting.

Pictures of Location

I went to our possible location for shooting the film and took some photos for reference. This helped the others to know what the place was actually like.

Looking at film magazine covers

I began by researching lots of different film based magazines. Some of the magazines I looked at are:

• Total Film
• Empire

From this research I determined the what things to consider in creating my piece of media.

The front cover of a magazine is crucial to the success of a publication. It is used to draw in possible customers who may buy the magazine. The magazine usually implements a number of ways of getting a viewer's attention and interesting them enought to get them to purchase the magazine. These are:

• Usually a famous star or iconic image is used. For example Tom Cruise above or the face and importantly eyes of the terminator above that. This is a great way of getting the viewer to look at the magazine.
• The name of the magaizine is normally very large and can either be placed in the foreground or background. It is placed in the background if the main image needs to be placed over the top of it to give it more dominance. The title of a magazine is used to get the viewer to recognize the magazine and so they would buy it because of it's good reputation or because they liked it last time they bought it. Also the title helps to reassure the customer that the magazine is dedicated to film.
• Lots of smaller text is used to further intrigue the reader. This text normally outlines some of the interesting stories inside the magazine. These help to interest the reader so increase the likelihood that a magazine will sell.

Research on trailers

We watched and studied a number of trailers to better understand how they where constructed. We noted how the editing, sound, mise en scene and camera shots and movements where implemented when making a trailer.

Most trailers gradually build towards some sought of conclusion. usually the begging of a trailer is used to establish the story, location charecters and events that may take place during the film. This part of the film is usually slow paced and has some quite music in the background to move the trailer along smoothly. The trailer gradually builds and usually eventually culminates into a classic montage of action(either dialogue or phsical action on screen) this part is normally edited together so each frame is very short and is in time with the music which by this point has gotten much faster and louder. This section slightly disorientates the viewer as they are not quite sure what is happening which leads to the viewer wanting to know more, which they can do by watching the film.

This is an alternative idea for a trailer which I found very interesting. This trailer has no intention of trying to establish a plot or charecters it simply intends to intrigue the viewer so much that they are willing to split with money just to know just what the hell is going on.

Creating the Plot

We wrote a script that would go with our film. The helped us to decide what audio we would need to record and how much of it we would need to do. We will record the audio using an hd voice recorder.

Mother - Bye! Have a safe trip.

Grace - (Said sarcastically) Yeah yeah ...

Grace and Jayden carry their bags to the car. They then drive from the house down the road, Grace looks embarassed by her worried mother.

Grace - We're going to be late you know ...

Jayden - Don't worry about it, I know a short cut.

Jayden then turns the car into a dark road through the woodland, Grace looks fed up and tired.

The car then begins to break down

Jayden - No no no no ahhh.

Jayden then leaves the car and checks under the bonnet

Jayden - I just need to get some oil

Jayden then runs off to the nearest petrol station

Grace - This better not take long! (Woodland sound effects begin, gradual diminuendo before car pulls up behind )
Grace looks up, to see car in rear view mirror pull up behind
Breathing rate increase (Foley sound) Dialogue is unused until the end of the trailer, apart from girl screams/wails Grace wakes up in room, looks up to see man standing in doorway
Blake: Remember me?

Naming The Charecters and Film

We are now beginning to discuss names for the film and the characters in the film, at first we thought that leaving them un-named may make the film apply to more people as they would feel more sceptic as they could believe that it could happen to them. However we felt the need for names is a necessitie in the film. For the boyfriend we decided on the name - Jayden Harrison and for the female role - Grace Ryan. We felt that murderer needs a name because during the film you will not recognize him as the murderer because you dont know what happens til the end. This tactic is commonly used to show distinction between plot and story. His name is Blake Young.


Choosing a name was probably the hardest job we have had to do so far. We needed something catchy, short and interesting. Some examples of names we had decided were, Revenge, Silent Footsteps, Homocide, Isolation and Woods. Somw of these names we felt were to common and maybe did not link in with entity of the film however we discussed further more and have come up with the name 'Isolation: The Blake Young Story'.

StoryBoard

Today we drew a storyboard. This helped us to plan out how we would go about framing the shots and the action that would take place in each one. Ot also allowed us to visualize the scenes and find potential problems before they occur. Me and Stuart created the storyboard on an A3 piece of paper.

 Our storyboard provides a visual layout of events as they are to be seen through the camera lens and shows the sequence in which the shots will be seen by the viewer. The storyboard helped us to all contribute various ideas about shots, lighting, actions and how we would develop the story.

We had to create a story board so we all knew exactly what would be happening. We went over various camera angles in detail, and practiced filming in our own time to make them perfect for the final piece. We also became more familiar with the editing software that we would be using (Final Cut Express).

We also looked at a variety of different camera movements and techniques. These included the dutch tilts, tracking and panning shots. These shots all create suspense and disorientate the viewer which are key elements in any successful horror.